The mill is suitable, among other things, for grinding seeds (such as corn, wheat). The possibility of cooling the sample with dry ice extends the area of ​​application considerably. During the development of the mill, special attention was paid to the safety of the user. 

High performance: In combination with the variable speed from 3,000 rpm to 20,000 rpm, 1,000 watts of power guarantee very good shredding performance .

Interval operation: The option for interval programming can be easily activated using a button . For pre-shredding hard samples or for the Intermediate operation is an advantage when mixing thoroughly.

Integrated cooling: A cooling system is integrated in the grinding bowl so that indirect heat dissipation is possible. Grist and coolant thus remain separate.

Variety of containers (accessories): MultiDrive offers the right container for every shredding task. Vessels are not included in the scope of delivery.

High performance: In combination with the variable speed from 3,000 rpm to 20,000 rpm, 1,000 watts of power guarantee very good shredding performance .

Interval operation: The option for interval programming can be easily activated using a button . For pre-shredding hard samples or for the Intermediate operation is an advantage when mixing thoroughly.

Integrated cooling: A cooling system is integrated in the grinding bowl so that indirect heat dissipation is possible. Grist and coolant thus remain separate.

TFT display: A clear TFT display guarantees user-friendly operation.

Temperature measurement: MultiDrive control offers temperature measurement and vessel detection using RFID. A temperature limit for temperature-sensitive materials or certain intended reactions can be set to protect against overheating.

Weighing function is also in the comfortable workflow of IKA MultiDrive control the weighing function integrated. Weighing before crushing is carried out with the same mixing beaker, so that no transferring is necessary.

Variety of containers (accessories): MultiDrive offers the right container for every shredding task. Vessels are not included in the scope of delivery.

The grinding bowls and the cover are made of a transparent material so that grinding tests can be observed at any time.

The mill can be used for hard (up to Mohs 5), brittle and dry materials. It is particularly suitable for crushing seeds (such as corn, wheat).

The grinder only starts when the hood is closed and thus enables safe work.

• Clear, multilingual OLED display (including error message display)

• Timer, adjustable from 5s - 3 min

• USB interface (test control and documentation)

• Switchable interval operation

• Infinitely adjustable speed (5,000 - 25,000 rpm)

• Different operating modes

• Adjustable safety speed and time

• Programmable and storable test conditions

• Reproducible test results

• Touch keypad

• Scope of delivery includes three grinding bowls: 1 x MT 40; 1 x MT 100 and 1 x MMT 40

Particular attention was paid to safety when developing the mill. So the mill only starts when the hood is closed. If no grinding bowl is inserted in the drive, this is recognized by the device and the device also does not start. Even an incorrectly closed grinding bowl is recognized by the drive and an error message appears (device does not start). The grinding bowl cannot be opened during operation. The drive and the grinding bowls are sealed with a labyrinth seal so that no dust can escape from the grinding bowls or penetrate into the drive.

• Clear, multilingual OLED display.

• Timer, adjustable from 5 s - 3 min.

• USB interface for test control and documentation.

• Switchable interval operation.

• Infinitely adjustable speed from 5000 - 25000 1 / min.

• Different operating modes.

• Adjustable safety speed.

• Adjustable safety time.

• Programmable and storable test conditions.

• Error code display.

• Reproducible test results.

• Easy operation with membrane keyboard.

• Dust-tight closed housing.

• Low noise level.

• Scope of delivery includes two grinding bowls: 1 x MT 40.10, 1 x MMT 40.1

The test results of the new A 10 basic are comparable to the previous model A 10 because the grinding chamber, the beater geometries and the speed are identical.

The new A 10 basic mill offers the following additional user-friendly features:

• Digital timer

• Counter shows grinding time

• interval operation

• Brushless motor for a very long service life and low noise level

• Integrated cooling water connections

• Error code display

• Easy operation with membrane keyboard

• Easily replaceable clubs / knives for a variety of applications

• Grinding chamber reduction for small sample quantities and stainless steel beater A 10.1 included in the scope of delivery

• Easy opening and closing of the lid thanks to the bayonet catch

• Grinding bowl made of Tefcel (PTFE, glass fiber reinforced) with stainless steel inlet (1.4571), usable volume 80 ml (included in delivery). This enables ground material to become brittle directly in the grinding chamber with liquid nitrogen

• Grinding bowl 250 ml useful volume optionally available

• Intermittent operation: This is particularly advantageous for the pre-crushing of hard samples and thorough mixing.

• Integrated cooling: A cooling system integrated in the MI 250 grinding bowl enables indirect heat dissipation. You can also cool with dry ice.

In addition to the MultiDrive basic, the package also includes the 250 ml MI 250 grinding chamber with a stainless steel beater, making it the ideal successor to the M 20 batch mill.